Commscope-Andrew NHH-65A-R2B Andrew® Tri-band Antenna, 698–896 and 2x 1695–2360 MHz, 65° horizontal beamwidth, internal RET. Both high bands share the same electrical tilt.
Manufacturer: Commscope-Andrew
Part #: NHH-65A-R2B
Commscope-Andrew NHH-65A-R2B
Andrew® Tri-band Antenna, 698–896 and 2x 1695–2360 MHz, 65° horizontal beamwidth, internal RET. Both high bands share the same electrical tilt.
Name is required
Email is required
Email must be a valid email address
Phone must be a valid phone number

If you do not see what you need here, please enter the required manufacturer/part number.

Manufacturer*
Manufacturer is required
Part Number*
Part Number is required
Quantity is required
Quantity must contain only the following characters: 0-9

For large buy/sell lists, please email your list of parts to sales@launch3.net

Name is required
Email is required
Email must be a valid email address
Phone must be a valid phone number

If you do not see what you need here, please enter the required manufacturer/part number.

Manufacturer*
Manufacturer is required
Part Number*
Part Number is required
Quantity is required
Quantity must only contain only the following characters: 0-9

For large buy/sell lists, please email your list of parts to sales@launch3.net

Product overview

Andrew® Tri-band Antenna, 698–896 and 2x 1695–2360 MHz, 65° horizontal beamwidth, internal RET. Both high bands share the same electrical tilt.



  • Interleaved dipole technology providing for attractive, low wind load mechanical package

  • Internal SBT on low and high band allow remote RET control from the radio over the RF jumper cable

  • Separate RS-485 RET input/output for low and high band

  • One RET for low band and one RET for both high bands to ensure same tilt level for 4x Rx or 4x MIMO



Specifications

General

Part # NHH-65A-R2B
Manufacturer Commscope-Andrew
Genre Base Station
parts included BSAMNT-1

Certifications

Iso 9001:2008 Designed, manufactured and/or distributed under this quality management system
Rohs 2011/65/eu Compliant by Exemption
China Rohs Sj/t 11364-2006 Above Maximum Concentration Value (MCV)

Packed Dimensions

Depth 299.0 mm   |   11.8 in
Width 409.0 mm   |   16.1 in
Length 1532.0 mm   |   60.3 in
Shipping Weight 26.8 kg   |   59.1 lb

General Specifications

Band Multiband
Brand DualPol®
Antenna Type DualPol® multiband with internal RET
Antenna Brand Andrew®
Performance Note Outdoor usage
Operating Frequency Band 1695 – 2360 MHz   |   698 – 896 MHz

Mechanical Specifications

Color Light gray
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum   |   Low loss circuit board
Reflector Material Aluminum
Wind Loading, Rear 525.0 N @ 150 km/h 118.0 lbf @ 150 km/h
Wind Speed, Maximum 241 km/h   |   150 mph
Lightning Protection dc Ground
Rf Connector Location Bottom
Wind Loading, Frontal 446.0 N @ 150 km/h 100.3 lbf @ 150 km/h
Wind Loading, Lateral 145.0 N @ 150 km/h 32.6 lbf @ 150 km/h
Rf Connector Interface 7-16 DIN Female
Rf Connector Quantity, Total 6

Remote Electrical Tilt (ret) Information

Protocol 3GPP/AISG 2.0 (Multi-RET)
Internal Ret High band (1)   |   Low band (1)
Input Voltage 10–30 Vdc
Ret Interface 8-pin DIN Female   |   8-pin DIN Male
Internal Bias Tee Port 1   |   Port 3
Ret Interface, Quantity 2 female   |   2 male
Power Consumption, Idle State, Maximum 2.0 W
Power Consumption, Normal Conditions, Maximum 13.0 W

Dimensions

Depth 180.0 Mm   |   7.1 In
Width 301.0 Mm   |   11.9 In
Length 1413.0 Mm   |   55.6 In
Net Weight, Without Mounting Kit 15.9 Kg   |   35.1 Lb