Commscope-Andrew L7TDF-PS 7-16 DIN Female Positive Stop™ for 1-5/8 in LDF7-50A cable
Manufacturer: Commscope-Andrew
Part #: L7TDF-PS
Commscope-Andrew L7TDF-PS
7-16 DIN Female Positive Stop™ for 1-5/8 in LDF7-50A cable
Name is required
Email is required
Email must be a valid email address
Phone must be a valid phone number

If you do not see what you need here, please enter the required manufacturer/part number.

Manufacturer *
Manufacturer is required
Part Number *
Part Number is required
Quantity is required
Quantity must contain only the following characters: 0-9

For large buy/sell lists, please email your list of parts to sales@launch3.net

Name is required
Email is required
Email must be a valid email address
Phone must be a valid phone number

If you do not see what you need here, please enter the required manufacturer/part number.

Manufacturer *
Manufacturer is required
Part Number *
Part Number is required
Quantity is required
Quantity must only contain only the following characters: 0-9

For large buy/sell lists, please email your list of parts to sales@launch3.net

Product overview

7-16 DIN Female Positive Stop™ for 1-5/8 in LDF7-50A cable

Specifications

General

Part # L7TDF-PS
Manufacturer Commscope-Andrew
Genre Connectors and Components
AT&T/Oracle Part Number ANT.11904

Certifications

Rohs 2011/65/eu Compliant by Exemption
China Rohs Sj/t 11364-2006 Above Maximum Concentration Value (MCV)

Standard Conditions

Attenuation, Ambient Temperature 20 °C   |   68 °F
Average Power, Ambient Temperature 40 °C   |   104 °F

General Specifications

Brand HELIAX®   |   Positive Stop™
Interface 7-16 DIN Female
Body Style Straight
Mounting Angle Straight

Electrical Specifications

Average Power 3.0 kW @ 900 MHz
Cable Impedance 50 ohm
Dc Test Voltage 4000 V
Connector Impedance 50 ohm
Peak Power, Maximum 40.00 kW
3rd Order Imd, Typical -120 dBm @ 910 MHz
Insertion Loss, Typical 0.05 dB
Shielding Effectiveness -130 dB
Operating Frequency Band 0 – 2500 MHz
3rd Order Imd Test Method Two +43 dBm carriers
Insulation Resistance, Minimum 5000 MOhm
Inner Contact Resistance, Maximum 0.80 mOhm
Outer Contact Resistance, Maximum 1.50 mOhm
Rf Operating Voltage, Maximum (vrms) 1415.00 V

Mechanical Specifications

Pressurizable No
Insertion Force 200.17 N   |   45.00 lbf
Interface Durability 50 cycles
Attachment Durability 25 cycles
Inner Contact Plating Silver
Outer Contact Plating Trimetal
Insertion Force Method IEC 61169-1:15.2.4
Connector Retention Torque 13.60 N-m   |   120.37 in lb
Interface Durability Method IEC 61169-16:9.5
Inner Contact Attachment Method Captivated
Outer Contact Attachment Method Ring-flare
Connector Retention Tensile Force 2225 N   |   500 lbf

Environmental Specifications

Immersion Depth 1 m
Storage Temperature -55 °C to +85 °C (-67 °F to +185 °F)
Corrosion Test Method MIL-STD-1344A, Method 1001.1, Test Condition A
Immersion Test Mating Unmated
Immersion Test Method IEC 60529:2001, IP68
Operating Temperature -55 °C to +85 °C (-67 °F to +185 °F)
Vibration Test Method MIL-STD-202F, Method 204D, Test Condition B
Thermal Shock Test Method MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C
Water Jetting Test Mating Unmated
Water Jetting Test Method IEC 60529:2001, IP66
Mechanical Shock Test Method MIL-STD-202F, Method 213B, Test Condition C
Moisture Resistance Test Method MIL-STD-202F, Method 106F

Dimensions

Length 97.99 Mm   |   3.86 In
Weight 728.00 G   |   1.60 Lb
Diameter 62.61 Mm   |   2.47 In
Nominal Size 1-5/8 In