Manufacturer: Commscope-Andrew
Part: E15S09P80
TMA PCS DUAL DUPLEX, 1900 MHz Tower Mounted Amplifier, PCS
Name is required
Email is required
Email must be a valid email address
Phone must be a valid phone number

If you do not see what you need here, please enter the required manufacturer/part number.

Manufacturer *
Manufacturer is required
Part Number *
Part Number is required
Quantity is required
Quantity must contain only the following characters: 0-9

For large buy/sell lists, please email your list of parts to sales@launch3.net

Name is required
Email is required
Email must be a valid email address
Phone must be a valid phone number

If you do not see what you need here, please enter the required manufacturer/part number.

Manufacturer *
Manufacturer is required
Part Number *
Part Number is required
Quantity is required
Quantity must only contain only the following characters: 0-9

For large buy/sell lists, please email your list of parts to sales@launch3.net

Product overview

General Specifications  
Product Type   1-BTS:1-ANT (Uniplex)
Modularity   1-Single
Includes   Mounting hardware
Electrical Specifications
Sub-module 1
Branch 1
Port Designation ANT
License Band PCS 1900, LNA
 
Electrical Specifications Rx (Uplink)
Frequency Range 1850–1910 MHz
Bandwidth 60.00 MHz
Gain, nominal 12.0 dB
Gain Tolerance ±1.0 dB
Noise Figure, typical 1.3 dB
Group Delay Variation, maximum 50 ns
Group Delay Variation Bandwidth 5.00 MHz
Total Group Delay, maximum 150 ns
Output IP3, minimum 26 dBm
Return Loss, minimum 18 dB
Insertion Loss - Bypass Mode, typical 1.7 dB
 
Electrical Specifications Tx (Downlink)
Frequency Range 1930–1990 MHz
Bandwidth 60.00 MHz
Insertion Loss, maximum 0.70 dB
Insertion Loss, typical 0.30 dB
Group Delay Variation, maximum 15 ns
Group Delay Variation Bandwidth 5.00 MHz
Total Group Delay, maximum 50 ns
Return Loss, minimum 18 dB
Input Power, RMS, maximum 500 W
Input Power, PEP, maximum 5000 W
3rd Order PIM, typical -150 dBc (relative to carrier)
3rd Order PIM Test Method 2 x 20 W CW tones
dc Power/Alarm Electrical Specifications  
Voltage   8–30 Vdc
Voltage, CWA Mode   10–18 Vdc
Operating Current at Voltage   100 mA @ 12 V
Operating Current Tolerance   ±20 mA
Alarm Current, CWA Mode   190–280 mA @ 10–18 V
Lightning Surge Current   20 kA
Lightning Surge Current Waveform   8/20 waveform
   
Block Diagram  
 Click on image below to enlarge.
   
   
Mechanical Specifications  
RF Connector Interface   7-16 DIN Female
RF Connector Interface Body Style   Long neck
Ground Screw Diameter   6.00 mm
Color   Gray
Finish   Painted
Mount Type   Pole   |   Wall
Mounting Pipe Diameter   40–160 mm
Mounting Pipe Hardware   Band clamps (2)
   
Dimensions  
Height   260.0 mm   |   10.2 in
Width   170.0 mm   |   6.7 in
Depth   61.5 mm   |   2.4 in
Weight   4.0 kg   |   8.8 lb
   
Environmental Specifications  
Operating Temperature   -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity   Up to 100%
Ingress Protection Test Method   IEC 60529:2001, IP67

Specifications

General

Part E15S09P80
Manufacturer Commscope-Andrew
Genre Wireless
AT&T/Oracle Part Number CEQ.32082
Commcodes REV.01

Dimensions

Weight 8.8lbs
Width 6.7 in (170.18 mm)
Height 10.2 in (259.08 mm)
Depth 2.4 in (60.96 mm)