Manufacturer: ADC
Part #: D1M-1A0019
ADC DSX-1 Panel Front Split 84-Term 1-84 23 inch Black
Product overview
The D1M-1A0019 is an 84-termination DSX-1 front split cross-connect panel with bantam jacks.
Attributes
Color: Black
Dimensions (HxWxD): 4.97" x 23" x 8"
Mounting: 2", 3", or 4" recess in a 23" (58.2 cm) rack, using WECO/EIA mounting brackets
Terminations: 84
Designation: 1-84 Consecutive
LEDs: Red
Jack Type: Bantam
Cross-Connects: Wire Wrap / Front Split
IN/OUT Connections: Wire Wrap / Rear
Cable Management: (2) 2.25" x 4" (5.7 cm x 10.2 cm) Vertical Jumper Rings (each with 3 fingers), (2) Rear Horizontal Cable Bars
Impedance: 100 Ohms
Voltage: -48 vDC
Some key features and benefits of the D1M-1A0019 are:
Die-cast Bantam jacks are rigorously tested with over 10,000 insertions/withdrawals
Superior cable management designed into each panel
LEDs flash at both ends of the monitored circuit for 30 seconds
Cross-connections are located on both sides of the jacks on the front of the panel
Guarantees reliability, durability, and quality over time
Simplifies cable routing and circuit identification for growing and changing networks
Quick identification of cross-connected circuits
Maximum panel circuit density in a front cross-connect style
Attributes
Color: Black
Dimensions (HxWxD): 4.97" x 23" x 8"
Mounting: 2", 3", or 4" recess in a 23" (58.2 cm) rack, using WECO/EIA mounting brackets
Terminations: 84
Designation: 1-84 Consecutive
LEDs: Red
Jack Type: Bantam
Cross-Connects: Wire Wrap / Front Split
IN/OUT Connections: Wire Wrap / Rear
Cable Management: (2) 2.25" x 4" (5.7 cm x 10.2 cm) Vertical Jumper Rings (each with 3 fingers), (2) Rear Horizontal Cable Bars
Impedance: 100 Ohms
Voltage: -48 vDC
Some key features and benefits of the D1M-1A0019 are:
Die-cast Bantam jacks are rigorously tested with over 10,000 insertions/withdrawals
Superior cable management designed into each panel
LEDs flash at both ends of the monitored circuit for 30 seconds
Cross-connections are located on both sides of the jacks on the front of the panel
Guarantees reliability, durability, and quality over time
Simplifies cable routing and circuit identification for growing and changing networks
Quick identification of cross-connected circuits
Maximum panel circuit density in a front cross-connect style
Specifications
General
| Part # | D1M-1A0019 |
| Manufacturer | ADC |
| AT&T/Oracle Part Number | SEQ.21160 |
Dimensions
| Weight | 20.0lbs |
