The D1M-1C1026 is a 28-termination front right cross-connect panel with bantam jacks. The cross-connect terminations use wire wrap pins located on the front right. The IN/OUT terminations use RJ48C located on the rear. The panel includes two 1.25-inch x 4-inch (3.2 cm x 10.2 cm) vertical jumper rings, horizontal jumper tray, and designation labels numbered 1-28. The panel can be mounted with a 2-inch recess in a 19-inch (48.3 cm) rack. Some key features and benefits of the D1M-1C1026 are: Superior cable management designed into each panel Cross-connections are located on one side of the jacks on the front of the panel Designed and manufactured in ADC's ISO 9001 facilities Simplifies cable routing and circuit identification for growing and changing networks Maximum panel circuit density in a front cross-connect style First-class quality, service, and support